Operating Instructions; Select Drying Temperature; Select The Cycle - Maytag LDE5914AAL User Manual

OPERATING INSTRUCTIONS
Select Drying Temperature
Turn the temperature selector knob to the proper
drying temperature. The choices are:
REGULAR-- Use for drying sturdy cottons or
regular garments and those items labeled "Tumble
Dry," etc.
MEDIUM -- (Not on all models) Use for
permanent press, synthetics and lightweight
cottons and those items labeled "Tumble Dry
Medium," etc.
DELICATE-- Use for drying those heot_sensitive
items labeled "Tumble Dry Low," "Tumble Dry
Warm," etc.
AIR FLUFF -- Use this no heat cycle to fluff
decorator items in air at room temperature.
Select the Cycle
The ElectronicDry Control cycles include: Regular
Fabrics and Permanent Press.These cycles
provide automatic sensing of the moisture amount
in the load and shut off when the selected dryness
is reached. The time required to reach that
dryness will vary for each load according to the
size of the load, the weight of the fabric, length of
venting, etc. For these cycles, set the pointer to the
desired dryness setting for the cycle. The Time Dry
Features may vary
cycle does not sense the moisture, but rather, dries
items by setting a desired time on the dial.
NOTE: The dial is designed to turn in either
direction.
REGULARFABRICS-- Use this cycle for non-
permanent press loads such as towels, underwear,
etc. At the end of the cycle there is an automatic
cool down of approximately 6 minutes and a
momentary buzzer.
PERMANENT PRESS-- Use this cycle for
permanent press loads or no-iron fabrics such as
nylon, acrylic, polyester or blends. At the end of
the cycle there is an automatic coo! down of
approximately 13 minutes. The buzzer will sound
two to three times during the cool down to let you
know the cycle is nearly over.
The Press Care feature in this cycle extends the
cool down portion. It provides an additional 20
minutes of tumbling in unheated air. A buzzer will
sound at the end of the cycle.
TIME DRY -- This cycle may be used for any load
when Electronic Dry is not preferred. Set the dial
to the amount of time desired. This will be
followed by approximately 5 minutes of cool
down and a momentary buzzer.
WRINKLE RELEASE -- Found in the Time Dry
portion of the dial, use this cycle to release
wrinkles from items that are clean and dry but
PAGE 4 rmmll