Remote Controlbuttons 23 - Philips CCB092AT Owner's Manual

Remote ControlButtons 23
F.FWD_ Button
When tape playback is stopped, press to fast forward the tape at
high speed. During tape playback, press to fast forward the tape
while the picture stays on the screen. Details are on page 42.
Press to change the setting of an item in the on-screen menu or
press to proceed to the next menu.
SLEEP/WAKE UP Button
Press to set the Sleep Timer, Details are on page 44. Press to set
the Wake Up Timer, Details are on page 45.
POWER Button
Press to turn on or off the TV/VCR.
PLAY/A Button
Press to play a tape. Details are on page 29.
Press
to release Search
or Still mode and return to normal playback. Details are on page
42. Press to select an item in the menu.
CLEAR Button
Press to erase incorrect data when programming TV/VCR func-
tions. Also, press to reset the real-time counter to 0:00:00.
Details are on page 41,
Number Buttons
Use to select channels and to program
TV/VCR
functions (such as
setting the clock).
® Cable Users
Enter channel numbers as a two-digit number for the quickest results.
For example, to select channel 6, press 0,6. If you only press the
Number 6 button, channel 6 will be selected after a brief delay.
(There also may be a brief delay when you select channels 10, 11, and
12.) If you want to select channels 100 and above, enter channel num-
bers as a three-digit number. For example, to select channel 117,
press 1, 1, 7.
® Antenna Users
Enter channel numbers as a two-digit number for the quickest results.
You may only select channels 2-69. For example, to select channel 5,
press 0,5. If you only press the Number 5 button, channel 5 will be
selected after a brief delay.
SPEED Button
Press to select the recording speed (SP or
SLP).
ALT. CH
(Alternate Channel) Button
Press to return to the TV channel you were viewing immediately
before switching to your current channel.
MUTE Button
Press to eliminate the
TViVCR's
sound. Press again to return to
the previous volume level.
VOL(ume) _/_/ Button
Press to adjust the sound level. If you press the VOL(ume) z_/
button when the sound is muted, the sound will be restored.