Detailed BOX connection
Connection type
1
IP address and subnet mask of
the BOX
(IP Address1, IP Address2)
2
Default Gateway IP address
(Default Gateway)
3
IP address of the NTP server
(NTP Server)
4
IP address of the FTP server
(FTP Server)
5
IP address of the syslog server
(SYSLOG Server)
Note:
• If any one of the IP addresses is a duplication of one of other devices, the failure screen is displayed.
If any one of the IP addresses is a duplication of one of other devices at BOX start-up, "Alarm 2" lights on
the front panel. Determine IP addresses appropriately.
• If a Windows XP-based PC starts after the start of BOX operation, duplication detection cannot be per-
formed. Be aware of the IP system for integrating the aforementioned PC into the system.
• If you forget the IP address of the BOX, the initial IP address resumes by setting the rotary switch on the
rear panel to "8" and turning the power off and then on. After making sure that the initial IP address
resumes, put the rotary switch back to "0". This operation also allows "Username and password for BOX" to
be initialized.
• Change the IP address at shipment, "192.168.10.10", from the viewpoint of security.
Description
IP address and subnet mask of the BOX
• For processing with only 1 camera in intrusion detection,
Leave the IP address/subnet mask of the IP address 2 blank.
• For processing with 2 cameras in intrusion detection,
Fill in the IP address/subnet mask of the IP address 2. The sub-
net mask should the same as the subnet mask of the address 1.
Default Gateway IP address.
If an NTP server is established for time adjustment of the BOX, this
address is specified. Otherwise, leave this blank.
If parameters needed for image recognition are saved on an external
device (server), this address is specified. Otherwise, leave this blank.
The settings are performed for an FTP server (such as a PC).
User name: box
Password: panasonic
Folder location & file name:
(FTP root folder)/************/box.tar.gz
"************" is filled with 12 digits IP address with dots deleted and
octets zero-filled.
(Ex) When the IP address of the BOX is "192.168.10.10", the folder
name is '192168010010'.
If the syslog of the BOX is saved on an external syslog server, this
address is specified. Otherwise, leave this blank.
19