Kenmore 911.95475 Owner's Manual page 19

CARE ANDCLEANING
Self-Cleaning Cycle
lu
For best results, follow the steps in
PREPARING YOUR OVEN
2. Slide the latch handle to the right
3. Turn the oven control knob to
"CLEAN" The "CLEAN" and
"OVEN OH" indicator lights
will glow,
4. The handle wilt lock when high tem-
peratures are reached
5. The clean cycle lasts 4 hours and 20
minutes This includes cool down
time. The "OVEN ON" and
"CLEAH" indicator lights will blink
at the end of the clean cycle
6. After the cycle is finished, turn the
oven control knob to the off position.
7. When the temperature has cooled,
the door latch handle will easily slide
to the left
Turn the oven control knob to the off
position You will need to wait for the
oven temperature to drop below the
lock temperature (approx 1 hour)
before attempting to open the door. The
indicator light will not blink if the cycle is
interrupted.
After the cycle, you may notice some
white ash in the
oven ,Just wipe it up
with a damp cloth or
sponge
If white spots
remain, scrub them with a soap-filled
steel wool pad Be sure to rinse
thoroughly These are usually deposits
of salt that cannot be removed during
the cycle
If for any reason you are not
satisfied with the cleaning
results, just repeat the cycle.
19