Front Wheel Mount; Front Wheel Bearings; Engine Lubrication; Steering Control Shafts - Husqvarna RZ4219 BF Operator's Manual

LUBRICATION
Front Wheel Mount
Lubricate with a grease gun, one zerk for each wheel
mount,
Use only good quality bearing grease,
Grease from well-known brand names (petrochemical
companies, etc,) usually maintains a good quality,
Front Wheel Bearings
Lubricate with a grease gun, one zerk for each set of
wheel bearings,
Use only good quality bearing grease,
IMPORTANT INFORMATION
Use minimal lubrication and remove excess
lubricant so that is does not come into contact
with belts or belt pulley drive surfaces.
Lubricating the wheel bearings
8050-009
Engine Lubrication
Refer to the engine manufacturer's manual for
maintenance and service instructions,
Steering Control Shafts
Tip the driver's seat,
Lubricate with a grease gun, one zerk for each
steering control shaft,
Use only good quality molybdenum disulphide
grease,
Grease from well-known brand names (petrochemical
companies, etc,) usually maintains a good quality,
Transmission
The transmission is maintenance free with no need for
level checks or oil changes, If a leak occurs, replace
the unit or contact the Husqvarna dealer,
Lubricating the steering control shafts
8058-076
42