Hitachi 31CX4B Operating Manual page 31

i THE GENIUS REMOTE TO LEARN ADDITIONAL
TIONS FOR CLU-851GR
Js Remote is equipped with a learning function
ws it to learn additional infrared control codes.
te will not .only control the television, a VCR, and
_x. but also other electronic equipment which
infrared remote transmitter, by learning the
r's codes.
,red remote control codes can be stored in
Before starting the memory operation
Since the infrared signals sent from the remote transmit-
ter may be reflected by a wall, door, etc.. even if the
transmitter is not pointed directly at the device, it may
operate. When storing the remote control codes of an-
other device, turn off the power of the device (VCR. Cable
Converter, etc.)
If you do not do this, the device may work unexpectedly.
The power could be turned on, an important tape could
be erased, the volume could increase too much, etc..
"'_"" _
?
POWER READY LEARN
! " II . II c il o
II _ II ,
II G II .-
!, Jl, II• .....
lllL-..,,
......................... _ ....................................
®®@i
@@@.
.............. ......... /6..i
H_
GENIUS REMOTE
CLU-B51GR
®
@
LEARNABLE BuI-rONS
These buttons can "learn" the codes of other remote
control transmitters when the MULTI-PAGE select
switch is set to the "USER" mode.
MULTI-PAGE keys (A through L): No codes
have been factory stored to these keys.
Learning buttons other than MULTI-PAGE but-
tons: the codes for the TV have been stored in
memory However, the remote control codes of
other equipment (cable converter, audio equip-
ment, etc.) can be stored using the learning
function as shown on page and page 34 and 35.
EXCLUSIVE BUTTONS
These buttons are for operating the TV.