Table of Contents
Advertisement
2.2
CMOS SENSOR
2.2.1
Inca 320
In the Inca 320 a monochrome sensor IBIS5A-1300 from
FillFactory is implemented. This sensor is dedicated to
industrial machine vision solutions and has both a rolling
and a synchronous shutter. High dynamical range scenes
can be captured using the double or multiples slope
functionality. The following main features, supported by the
Inca 320, are available:
•
1280 x 1024 Pixels
•
10 bit 40 Msample ADC resolution
•
2/3" sensor housing
•
One region of interest
•
Programmable exposure time
•
10, 20 or 40 MHz pixelclock
•
Full framerate 27 frames per second
•
Optical dynamic range 64 dB in single slope,
up to 100 dB in multi slope.
•
Synthetic test image
•
Decimation factor 2 for higher frame rates of sub-
sampled images
2.3
CAMERA CONNECTIONS
The rear side of the camera gives the user a great number
of possibilities for interfacing the camera.
•
10BaseT/100BaseT Ethernet
•
One trigger input and one output for flash control
2005-12-12
•
Digital input 6 bits optically isolated
•
Digital output 6 bits optically isolated
•
RS232
•
Camera reset
•
Watchdog
•
VGA and CVBS for display purposes
Figure 2-1 Inca 320 back side connectors
Page 5
Advertisement
Table of Contents
