INSERTING BATTERIES INTO THE REMOTE CONTROL
Insert the batteries (two 1.5V type AAA) supplied with the set. Make sure that
the polarity matches with the (+) and (-) marks inside the battery compartment.
Do not forget to Replace the battery cover.
AERIAL CONNECTION & MAINS CONNECTION
When using an outdoor aerial, it
is usually connected to the set
by means of 75 ohms coaxial
cable.
For
correct
colour
reception an effective aerial ins-
tallation is most important.
Plug the mains cable into the
power socket with 220-240 V /
50Hz AC.
TV CONTROLS
Mains power
button
SWITCHING ON AND OFF
SWITCHING ON
Switch the set on with the power button, (ON/OFF) and then PR UP or DOWN buttons on the front of the set. Or
POWER button or the «PR
SWITCHING OFF
Press POWER button (
If you don't use the set for an extended period of time turn it off with MAIN POWER button on the set.
TV INSTALLATION
AV1
ON/OFF
VIDEO L AUDIO R
Video
Audio
Stand-by
input
input sockets
indicator
sockets
Head Phone
socket
and PR
» button or one of the NUMBER buttons on the remote control.
) on the remote control to return the set to its standby mode.
AV2
220-240 V 50 Hz AC
PR
Remote
Volume
Programme
+/-
+/-
sensor
buttons
buttons
TV/AV
button
G B