Hitachi CX-45E User Manual page 12

TUNER SECTION
TUNER AERIALS
• For FM, extend the telescopic aerial. To improve FM-reception, incline and turn the
aerial. Reduce its length if the FM-signal is too strong (very close to a transmitter).
• For MW and LW, the set is provided with a built-in aerial, so the telescopic aerial is not
needed. Direct the aerial by turning the whole set.
STEREO/MONO (FM only)
• When an FM stereo signal is too weak or noisy for stereo listening, set the switch [33]
to the MONO position to reduce the noise.
TUNER with PRESET STATIONS
• Allows you to memorize 20 stations for FM, 10 stations for MW and 10 stations for LW.
BEAT CUT (MW and LW only)
• If beat noise is audible while recording from an MW or LW radio programme, flip switch
[33] over from [A] to [B] or from [B] to [A] to reduce the noise.
TAPE RECORDER SECTION
Use only NORMAL tapes in the cassette deck of this sound system. The characteristics
of the cassette deck mechanisms do not match other types of tape.
REWIND (¡) AND FAST FORWARD (1) BUTTONS
To rewind the tape, press the REWIND button [6]. To rapidly advance the tape, press the
F.FWD button [7]. To stop rewinding or fast forwarding, press the STOP/EJECT button [8].
PAUSE BUTTON (8)
To halt the tape temporarily during recording or playback, press the PAUSE button [9]. To
release the pause mode, press the PAUSE button [9] again.
STOP/EJECT BUTTON (7
When this button is pressed with the tape running, the tape stops. When it is pressed in the
stop mode, the cassette door opens.
VARIABLE MONITOR
During recording, adjustment of volume is unnecessary. A programme may by heard at any
desired volume, and the setting of the BASS BOOST Button [12] does not affect the volume
because of the "Variable Monitor" device.
)
12