Connecting The Unit To A Pc - Sharp WA-MP40W Operation Manual

Connecting the unit to a PC

WA-MP40(W)/(BK)
WA-MP400(W)/(BK)
ENGLISH
Connect the unit to a PC to transfer file data.
PC
USB connection cable
1. Open the USB port cover.
2. Connect the unit to a PC with the USB
cable. Whilst the unit is connected to
the PC, the message shown on the
right appears on the unit.
Caution:
● Do not disconnect the USB cable whilst transferring audio data
from a PC. Audio data on the unit may become corrupted.
● Operation is not guaranteed if the PC is connected to two or more
USB devices.
● Connect the USB cable to the PC's USB port. If connected via a
USB hub, operation cannot be guaranteed.
● We do not guarantee operation of the unit with self-built PCs or
PCs with modified motherboards.
● Make sure to use the supplied USB cable. Use of other cables
(two-way cables, extension cables, etc.) degrades the quality of
connection and may cause a malfunction or radiation.
E-10
To the USB port
FS
READY
Notes:
● The buttons on the unit do not work if it is connected to a PC.
Disconnect the PC to operate on the unit.
● The battery also rechargeable by connecting the unit to a PC with
the USB cable.
■ Installing a USB driver
If you use a PC running Windows 98 Second Edition, install a USB
driver from the supplied CD-ROM.
● The installation is not necessary for a PC running Windows
Millennium Edition, Windows 2000 Professional, Windows XP
Professional or Windows XP Home Edition.
1
Insert the supplied CD-ROM into your CD-ROM drive.
2
Connect the unit to a PC by USB cable.
The "The Wizard searches for new drivers..." screen appears.
3
Click the "Next" button.
The "What you want Windows to do?" screen appears.
4
Select "Search for the best driver..." and click "Next"
button.
The "Windows will search for new drivers..." screen appears.
5
Select "CD-ROM drive" and click "Next" button.
The "Windows driver file search for the device" screen appears.
6
Click the "Next" button.
The "USB Mass Storage Device..." screen appears.
7
Click the "Finish" button.