Symbols - Craftsman 315.173700 Operator's Manual

Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper inter-
pretation of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
."k., Alternating Current Type of current
---= Direct Current Type or a characteristic of current
no No Load Speed Rotational speed, at no load
[] Class 11 Construction Double-insulated construction
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read The Operator's Manual To reduce the risk of injury, user must read and understand
operator's manual before using this product.
O Always wear safety goggles or safety glasses with side
Eye Protection
shields and a full face shield when operating this product.
,_, Safety Precautions that involve your safety.
Alert
Failure to keep your hands away from the blade will result in
No Hands Symbol serious personal injury.
No Hands Symbol Failure to keep your hands away from the blade will result in
serious personal injury.
No Hands Symbol Failure to keep your hands away from the blade will result in
serious personal injury.
,_ No Hands Symbol Failure to keep your hands away from the blade will result in
serious personal injury.
5