Battery Pack Removal And Preparation For Recycling - Craftsman 315.114520 Operator's Manual

A WARNING: When servicing, use only identical
Craftsman replacement parts. Use of any other
pert may create a hazard or cause product damage.
Avoid using solventswhen cleaning plasticparts, Most
plastics ore susceptibleto damage from vadous types of
commercialsolventsand may be damaged by their use.
Use clean clothsto remove dirt, dust.oil, grease, etc.
A WARNING: Do not at any time let brake fluids,
gasoline, petroleum-based products, penetrating oils,
etc. come In contact with plastic parts. They contain
chemicals that can damage, weaken or destroy
plastic.
Do not abuse power tools. Abusive practices can
damage tool as well as wor_<pleca.
Only the parts shown on pe.rts list, page 17, ore intended
to be repaired or replaced by the customer. AI] other parts
should be replaced at a Sears Service Center.
_ WARNING: Do not attempt to modify this tool or
create acsessodes not recommended for use with
this tool, Any such alteration or modification is
misuse and could result In a hazardous condition
leading to possible serious personal [njury.
BAI"rERIES
Your dr[Irs battery pack ]s equipped with nickel-cadmium
rechargeable batteries, Length of service from each
charging will depend on the type of work you are doing,
The pettedes in this tool have been designed to provide
maximum trouble free life. However, like all battedes, they
will eventually wear out, no not disassemble battery pack
and attempt to replace the batteries. Handling of these
batteries, especially when weadng rings and Jewelry,
could result in a serious bum.
To obtain the longest possible pettery life, we suggest the
following:
• Store and charge your batteries in a cool area.
Temperatures above or below normal room
temperature will shorten battery life.
• Never store batteries in a discharged condition.
Recharge them immediately after they are
discharged,
• All L_ttorles gradually lose their charge. The higher
the temperature the qu[cker they lose their charge, ff
you store your tool for long pedods of time without
using it. recharge the batteries every month or two,
This practise will prolong battery life,
To preservenaturalresources,p4ease
recycleor disposeol batteriesproperly.
This productcontains nickel-cadmium
batteries, Local, state or federal laws
may prohibitdisposalof nickel-cadmium
batteries in ordinarytrash.
Consultyour local waste authority for Information
regardingavailable recycling and/or dlsposaJ options,
BATTERY PACK REMOVAL AND PREPARATION
FOR RECYCLING
A WARNING: Upon removal, cover the battery pack's
terminals with heavy duty adhesive tape. Do not
attempt to destroy or disassemble battery pack or
remove any of its components, Nickel-cadmium
batteries must be recycled or disposed of properly.
Also, never touch both termlnels with metal objects
and/or body parts as short circuit may result. Keep
away from children. Failure to comply with these
warnings could result In fire and/or serious Injury.
The following recommended acsessorles are currently available at Sears Retell Stores,
• 6-Pc. Extra Length Magnite Power Bit Set • 17-Pc, Power Sorewddver/Nutdrlver Set and Case
• 30-Pc. Power Screwdriver/Nutdr]ver Set and Case • High Speed Bits (For Wood or Metal),.3/4 In. Max.
_k WARNING: The use of attachments or accessories not listed might be hazardous.
16