Small Parts Lsit - Craftsman Professional 315.228510 Owner's Manual

The following items are included with your Table Saw.
X
T
R. Motor Mounting Plate
(Hardware Shown Separately) ............................. 1
S. Blade Guard Bracket ............................................ 1
T. Table Extension (Hardware Shown Separately) ,..2
U. Hangers (Hardware Shown Separately) ............... 4
V. Micro Index Gear Rack
(Hardware Shown Separately) ............................. 1
W. Fine Adjustment Knob
(Hardware Shown Separately) ............................. 1
X. Separator Channel
(Hardware Shown Separately) ............................. 1
Y, Dust Bag (not shown) ........................................... 1
Z. Owner's Manual (not shown) ................................ 1
AA. Hardware for Leg Stand, Leveling Feet, and
Mounting Saw Base (Shown Separately) ............. 1
BB. Hardware for Blade Guard Bracket and
Blade Guard Assembly (Shown Separately) ........ 1
Check all loose parts from the box with the list on the previous page, the figures below and on the following
page. Small items such as fasteners and end caps are shown in figures 2 b and 2 c. Follow the instructions in
the Assembly section to assemble your new saw.
C. Hardware for Belt Guard .................................... 1
hex nut (#10-24) ................................................. 4
flat washer (#10) ................................................. 4
F. Hardware for Handwheel ................................... 2
screw (3/16-24 x 1/2 in.) ..................................... 2
flat washer (3/16 in.) ........................................... 2
M,
Hardware for Mounting Motor and Switch Box
Hardware for Mounting Motor ............................ 1
hex bolt (5/16-18 x 1 in.) .................................... 4
flat washer (5/16 in.) ........................................... 8
lock washer (5/16 in.) ......................................... 4
hex nut (5/16-18) ................................................ 4
Hardware for Mounting Switch Assembly
square head nut (1/4-20) .................................... 2
screw (1/4-20 x 3/8) ............................................ 2
11 I:RRFT$14RN" TABLE SAW 315.228510