Advertisement
,_
WARNING:
When servicing, use only identical
Craftsman replacement parts. Use of any other part
may create a hazard or cause product damage.
,_,
WARNING:
Always wear safety goggles or safety
glasses with side shields when using compressed air
to clean tools. If the operation is dusty, also wear a
dust mask.
_
WARNING:
To avoid serious personal injury, always
remove the battery pack from the tool when cleaning
or performing any maintenance.
GENERAL
MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
_h
WARNING:
Do not at
time let brake fluids,
any
gasoline, petroleum-based
products, penetrating oils,
etc. come in contact with plastic parts. Chemicals
can damage, weaken or destroy plastic which may
result in serious personal injury.
Only the parts shown on parts list, page 19, are intended
to be repaired or replaced by the customer. All other parts
should be replaced at a Sears Service Center.
_k
WARNING:
Do not attempt to modify this tool
or create accessories not recommended
for use
with this tool. Any such alteration or modification
is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
BATTERIES
The battery pack for this tool is equipped with nickel-
cadmium rechargeable batteries. Length of service from
each charging will depend on the type of work you are
doing.
The batteries in this tool have been designed to provide
maximum trouble free life. However, like all batteries, they
will eventually wear out. Do not disassemble battery pack
and attempt to replace the batteries. Handling of these
batteries, especially when wearing rings and jewelry, could
result in a serious burn.
To obtain the longest possible battery life, we suggest the
following:
•
Store and charge your batteries in a cool area.
Temperatures
below 50°F or above 100°F will shorten
battery life.
•
Never store batteries in a discharged condition.
Recharge them immediately after they are discharged.
• All batteries gradually lose their charge. The higher the
temperature the quicker they lose their charge. If you
store your tool for long periods of time without using
it, recharge the batteries every month or two. This
practice will prolong battery life.
BATTERY PACK REMOVAL
AND
PREPARATION
FOR RECYCLING
To preserve natural resources, please
recycle or dispose of batteries
properly.
This product contains nickel-
cadmium batteries. Local, state or
federal laws may prohibit disposal of
nickel-cadmium
batteries in ordinary
trash.
Consult your local waste authority for information
regarding available recycling and/or disposal options.
A
WARNING:
Upon removal, cover the battery
pack's terminals with heavy duty adhesive tape. Do
not attempt to destroy or disassemble battery pack
or remove any of its components.
Nickel-cadmium
batteries must be recycled or disposed of properly.
Also, never touch both terminals with metal objects
and/or body parts as short circuit may result. Keep
away from children. Failure to comply with these
warnings could result in fire and/or serious injury.
16
Advertisement
