Drawbar; Latch; Hitch Bracket - Craftsman 610.243551 Operator's Manual

.4
f
(_ Drawbar Pre-Assembly
1/4" Lock
x 3/4" Hex
Latch
Latch Spring
Drawbar
O
3/8" Lock Washer
E
DETAIL OF LATCH
NOTE POSITION OF LATCH SPRING
-3/8" Hex Nut
Figure 4.
* Assemble the Latch as shown with the Latch (14) between the two Latch Posts (13). Use one 1/4" x 3/4" Hex
Head Bolt (22) with 1/4" Lock Nut (22LN). Add the other 1/4" x 3/4" Bolt for stability.
* Hook up the Latch Spring (15) using the holes designated with the letter "X". SEE DETAIL.
* Mount the Latch Assembly to the Drawbar (12) with two 3/8" x 3/4" Hex Head Bolts (28) and Lock Nuts (28LN).
Adjust the Lock Nuts so that the Latch moves freely between Latch Posts.
* Hitch Bracket (16) is attached with 3/8" x 1" Hex Head Bolts (29) and Lock Washer (27W) and Hex Nut (27N).
THIS STEP REQUIRES
t2}!3_::L°CkNWu_ sher
3/8,, x 3/,. Hex Bo,,
- 3/8" Lock Nut
(2) - 1/4" x 3/4" Hex Bolt
(2) - 1/4" Lock Nut
FOR MISS/NG PARTS, Call 1-800-652-2321, Mon- F/_ 8 a.m. - 5 p, m, E,S. T.
Page 8