How To Stop Your Pressure Washer; How To Use Accessory Tray - Craftsman 580.752211 Operator's Manual

How to Stop Your Pressure Washer
1. Releasespray gun trigger and let engine idle for two
minutes.
2. Move throttle to SLOW position, then STOPposition.
_. WARNING: Backfire, fire or engine damage could
Occur.
* DO NOT stop engine by moving choke leverto "Choke" position.
3. ALWAYS point spray gun in a safe direction, push red
button and squeezespray gun trigger to releaseretained
high water pressure.
IMPORTANT:Spray gun traps high water pressure, even
when engine is stopped and water is disconnected.
_. WARNING: The high pressure stream of water that this
equipment produces can cut through skin and
its underlying tissues, leading to serious injury
and possible amputation.
Spray gun traps high water pressure, even when engine is
stopped and water is disconnected, which can cause
injury.
• Keephigh pressure hoseconnected to pumpand spraygun
whilesystemis pressurized.
• ALWAYSpointspraygun in safedirection,pressred button
andsqueeze sprayguntriggerto release highpressure, e very
time you stop engine.
How to Use Accessory Tray
The unit is equipped with an accessory tray with places to
store your spray gun, nozzle extension and quick connect
PrecisionSprai Mnozzles.There is also a detachable hose
wrap at the back of the accessory tray to hold your high
pressure hose.
1. Placespray tip extensionin clip on back of accessorytray.
2. Place spray gun through hole on accessory tray on right
side of unit.
3. insert multi-colored spray tips in spaces provided in
accessory tray.
4. Wrap high pressure hose on hose wrap then attach hose
wrap to back of accessory tray.
5. Hook provided on back of accessory tray for safely
storing safety goggles.
How to Use PrecisionSpray
TM
NozzJeSystem
The quick-connect on the nozzle extension allows you to
switch between five different PrecisionSprai Msystem
nozzles. PrecisionSpray
TM
nozzlescan be changed while
pressure washer is running once spray gun trigger lock is
engaged.
Follow these instructions to changePrecisionSpray
TM
nozzJe$:
1. Puii back collar on quick-connect and pull current
PrecisionSpray
TM
nozzle off. Store PrecisionSprai M
nozzles in holder provided on the accessory tray.
_. WARNING:The high pressure stream of water that this
_i_ equipment produces can cut through skin and
its underlying tissues, leading to serious injury
and possible amputation.
* NEVER exchange PrecisionSpray
TM
nozzles withoutthe trigger
lock beingengaged on the spraygun.
. DONOT twist PrecisionSprai M nozzles whilespraying.
.
Select desired PrecisionSprai Mnozzle:
* Select orange general PrecisionSprai Mnozzle for all
purpose cleaning. Cleansvinyl siding, brick patios,
concrete driveways and other surfaces.
* Select red max PrecisionSprai Mnozzlefor maximum
cleaning. Greatfor cleaningstubborn stains, including
grease,tar, wax, and other hard to removestains.
13