Craftsman 351.240930 Operator's Manual page 2

Warranty ...................... 2
Safety Rules ................... 2
Operation ..................... 3
Maintenance ................... 3
Parts Illustration and List ........ 4-5
Espahol ..................... 6-7
FULL ONE YEAR WARRANTY ON CRAFTSMAN 4" AND 6" DRILL PRESS
VISES
If within one full year from the date of purchase, this Craftsman Drill Press
Vise fails due to a defect in material or workmanship, Seers will repair it free
of charge.
Warranty service is available by simply returning the vise to the nearest Sears
Store or Service Center throughout the United States.
This warranty gives you specific legal rights and you may have other rights
which vary from state to state.
Sears, Roebuck and Co., Dept 817WA, Hoffman Estates, IL 60179
• Understand and obey all safety
instructions supplied with drill press,
mill, or other machines on which
vise is used.
• Clamp vise to work surface in at
least two mounting locations using
mounting grooves provided on base.
• Be sure workpiece is clamped
securely between jaws before start-
ing machining operation.
Do not over tighten--vise can devel-
op a large clamping force. Use only
force which is needed.
Do not pound or hammer on work-
piece. This vise is designed to clamp
the workpiece in a desired position
for machining operations only.
2