9,Position frontpanel a ndfrontpanel s trapintoplace.
insert1/4"-20 x 2"carriage boltthrough thefourlocations s hown.
Frontpanel s trap
Frontpanel
1/4-20 Tapered
Wing Nuts
10, Stand the unit onto the casters and attach 4
1/4-20 tapered wing nuts to the four carriage bolts
previously installed.
Then align back support with top
rear holes and insert (2) 1/4"-20 x 2" carriage bolts and
fasten with (2) 1/4"-20 wingnuts, Install push
pins into bottom rear holes as shown.
Push Pin
l/4"-20
Tapered Wingnut
1/4" - 20 X 2" Carriage
Bolt
Back Support
/
Push Pin
11