Craftsman 536.249810 Operator's Manual page 5

ASSEMBLY
ASSEMBLY
Read and fellow the assembly, operation and maintenance instruc-
tions. All fasteners are in the parts bag. De net discard any parts or
material until the unit is assembled. Lay out and identify all parts and
contents.
TOOLS REQUIRED
1. Pliers (1)
2. Adjustable open end wrenches (2
3. Blade type screwdriver (1)
4. Phillips screwdriver (1)
5. Short blade type screwdriver (1)
6. Open end wrenchs
- 3/8",
1/2", 7/16", 9/16"
7. Socket set recommended
HARDWARE PACKAGE - CONTENTS
The fasteners and other loose parts are shown below. The fasteners are shown at full size. The quantity is shown in brackets ().
On some models, all of the fasteners are not required.
(1) Bolt
(2) Carriage Bolt (1) Carriage Bolt
17x2!2 17x104
(2)Washer (!)Washer
@@@@ @ @
15x84 15x85 15x88 15x89 15x79
(2) Flange Nut (2) Flange Nut (2) Flange Nut (1) Locknut (2) Flange Nut
(!) Shoulder Bolt (2) Shoulder Bolt
I
6x110 30x20
(2) Stud (2) Cotter Pin
740227
(2) Knob
F-020902L 5