the HDLM device (dlmfdrvn) to hdisk. If the user application uses an LU
managed by HDLM, modify the user application appropriately.
To migrate to HDLM version 5.9 or later:
1
Log in to AIX as a user with root permissions.
.
¢
¢
2
Check the virtual SCSI disk recognition method being used.
.
Execute the dlmodmset utility for setting the HDLM execution environment
ODM in order to check the unique_id value:
The following shows an example of executing this utility when HDLM 5.6.3
has been installed:
# dlmodmset -o
Inquiry Log
Inquiry Log File Size
hdisk error check flag
HDLM pbuf count
Lun Reset
unique_id
HDLM Subclass
KAPL10800-I The dlmodmset utility completed normally.
#
If the unique_id value is on, the unique_id method is being used. If it is
off, the PVID method is being used. If the unique_id method is being
used, proceed to step 8.
3
Execute the following command to activate the volume group that is using
.
the virtual SCSI disk of the HDLM management-target hdisk:
# varyonvg volume-group-name
4
Execute the following command to mount the file system (under control
.
of the volume group) in the client logical partition:
# mount file-system-mount-point
5
Execute the following command to back up the volume group in the client
.
logical partition:
# savevg -i -f any-file-name-or-device-volume-name volume-group-
name
6
Execute the following command to unmount the file system in the client
.
logical partition:
# umount file-system-mount-point
7
Execute the following command to delete the volume group in the client
.
logical partition:
# reducevg -df volume-group-name hdisk-name
3-52
If you are using a virtual I/O server, see the virtual I/O server
documentation for details about how to log in to AIX.
If you are not using a virtual I/O server, proceed to step 10.
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for AIX(R))
: on
: 1000
: on
: 16384
: off
: off
: node