To Tune In To A Presetstation - JVC CA-HXD77 Instructions Manual

To save the power consumption while on
standby--Eco mode
While on standby...
ECO
7
Canceled _'
The display illumination (including the display
demonstration) disappears.
uste i
To selectthe band {FM/AN)
FM
AM
To tune in to a station
While FM or AM is selected...
To presetstations
)
You can preset 30 FM and 15 AM stations.
1 Tune in to a station yon want to preset, theu enter into
the presettiug mode.
SET
(While holding...)
2 Select a preset umnber for the station you stere.
3 Store
the station.
Increases the fl'equency.
Decreases the frequency.
When a station (frequency) with sufficient signal strength is
tuned in, the frequency search stops.
, When you repeatedly press the button, the frequency
changes step by step.
To stop searching manually, press either button.
If the received FM statiou is hard to listen )
FM MODE
(While holding...)
The MONO indicator
lights on the display.
Reception will improve
though stereo effect is
lost--monaural
reception mode.
To restore the stereo effect, press the button again (the
MONO indicator disappears).
SET
(While holding...)
'--_-i'-' F' '- '-'
To tune in to a presetstation
Select the band (FM or AM).
, i -[ZF B
2 Select a preset number for the station you store.
Examples:
To select preset number 5,
press5
i i To select preset number
":"_'"_'"'(02 )'"_"; To select preset number
15, press _10, 1, then 5.
To select preset number
30, press _lll, 3, then 0.
. You can also use _D.q/I-_l_'q on the remote control or the
PRESET +_ control on the main unit.
11