Cleaning
Cleaning the Image Scanner
If the glass of the scanner gets soiled from ink or paper dust, the quality of the image data may
deteriorate. Clean the glass every 6 months or every 100,000 passes.
Follow these steps to clean the glass.
1
Open the scanner cover.
(See
"Opening the Scanner Cover" on page
2
Lightly wipe the glass areas shown in the picture below with a soft, dry
cloth.
When the glass of the scanner is smeared with oil, grease or other
unremovable substance, wipe it with a cloth lightly dipped in alcohol.
• Do not use synthetic detergent, benzine, water, or other liquid for cleaning.
• Never apply any liquid directly to the glass of the scanner.
CAUTION
3
Close the scanner cover firmly until it clicks in place.
It is recommended to clean the image scanner once per week or once every 2,000 checks
for good reading results.
Doing so may result in a stain.
46.)
Chapter 1 Handling
4
55