Tv Outputselection Feature; Choosinga Connection - Samsung Blu-ray Player User Manual

TVOutput S election
Feature .....
Choosing a Connection
@
You may choose from VIDEO, S-VIDEO, COMPONENT
and HDMImode for video output.
Use the TV OUT SELECT button on the front panel of the
unit to select the video output while the disc is stopped.
- Video Output mode changes as follows when the
TV OUT SELECT button is pressed: NDMI .-, VIDEO
COMP _ HDMI order.
- To select HDMI output, press the TV OUT SELECT
button until the HDMI indicator lights.
- To select COMPONENT output, press the TV OUT
SELECT button until the COMP indicator lights.
- To select VIDEO or S-VIDEO output, press the TV OUT
SELECT button until the VIDEO indicator lights.
_ii • If HDMI mode is selected for TVs providing
display information (EDID), the TV resolution
_orr, will be automatically changed to the best
quality supported by the TV.
• If HDMI mode is selected for TVs that do not
provide display information (EDID),
resolution will be adjusted to 720p.
• If COMP (Component) mode is selected,
resolution will be adjusted to 480p.
• If VIDEO mode is selected, resolution will be
adjusted to 480i.
• Only resolutions supported by the TV are
available.
• Select the resolution from <Setup>
<Display Setup>. (See page 43.)
18 - English
The following shows examples of connections commonly used to
connect the BIu-raydisc player with a TV and other components.
Connecting to a TV(Video)
1. Using video/audio cables, connect the VIDEO
(yellow)/AUDIO (red and white) OUT terminals on the rear
of the Blu-ray disc player to the VIDEO (yellow)/AUDIO
(red and white) IN terminals of your TV.
2. Turn on the Biu-ray disc player and TV.
3. Press the TV OUT SELECT button on the front panel
of the unit until the VIDEO indicator lights. Make sure
the unit is in Stop mode.
4. Press the input selector on your TV remote control
until the Video signal from the Blu-ray disc player
appears on the TV screen.
• If you have set the remote controt to properly operate
with your TV (pages 15~16), press the INPUT SEL
button on the remote control and select VIDEO as the
external source of the TV.
NOT_
• If you want to connect to an Amplifier,
please refer to the Amplifier connection
page. (See pages 21 to 22)
• The number and position of terminals may
vary depending on your TV set. Piease refer
to the user's manual of your TV.
• If there is one audio input terminal on the TV,
connect it to the [AUDIO OUT][left] (white)
terminal of the Biu-ray disc player.
• If you set the TV Out Select to HDMI, the
Video/S-Video and Component Out
terminals will not output any signal.
• Blu-ray Disc Playback is not availabie with
this connection.