Printer Specifications - Sharp MX-2300G Safety Manual

Printer specifications

Type
Continuous printing speed
Printing resolution
Printer driver type
Supported protocols
Fonts
Interface port
Memory
Print area
*1 When the PS3 expansion kit (MX-PKX1) is installed and the machine is used as a PostScript printer.
*2 The standard printer driver of MX-2300G/MX-2700G
*3 When MX-2300G/MX-2700G are used, the printer expansion kit (MX-PBX1) is required.
*4 Barcode font kit (AR-PF1) is required.
*5 256MB expansion memory board (MX-SMX1) is required if one or more of the following is/are installed: Printer expansion kit
(MX-PBX1), PS3 expansion kit (MX-PKX1), Network scanner expansion kit (MX-NSX1), Internet fax expansion kit (MX-FWX1).
Built-in
Same as continuous copying speed (When printing same document continuously on A4
(8-1/2" x 11") plain paper in non-offset mode, excluding processing time.)
600 x 600 dpi / 1200 x 600 dpi*
*2 *3 *3
SPLC-c , PCL5c , PCL6 , PostScript 3 compatible*
TCP/IP, IPX/SPX, NetBEUI, EtherTalk
PCL5c, PCL6
1
PostScript 3 compatible*
LAN connectivity: 10Base-T / 100Base-TX
USB (type A): Supports USB 2.0 (Full speed)
MX-2300G/MX-2700G: 384 MB (256MB expansion memory board can be added.*
MX-2300N/MX-2700N: 640 MB
Entire page excluding margin of 4.2 mm (11/64") at each edge. The actual print area may vary
depending on the printer driver and the software application.
1
(black and white printing, rotating output not performed)
1
80 European fonts, 28 barcode fonts*
136 European fonts
USB (type B): Supports USB 2.0 (Hi speed)
SPECIFICATIONS
4
, 1 bitmap font
5
)
15