Sharp HT-M700H Operation Manual page 58

Changing the initial setting of DVD (continued)
HT-M700H
Setting Selectable parameters
(* indicates initial set-
Video Picture
Setup mode
Display Angle mark On*
Setup
Screen
saver
System Parental
Setup setting
Please en-
ter a 4-digit
password.
(Default
setting:
6629)
Password
Edit
Restore
Info
DivX
Registration
Code
55
tings.)
Auto Select a mode to optimise DVD, super video CD or video CD images on a TV.
Film
Auto: Images are automatically optimised according to the video source.
Video
Film: Suitable for progressive video output. Select for DVD movies, etc.
Smart*
Video: Suitable for interlaced video output. Select for DVD karaoke, super video
CD, video CD, etc.
Smart: Optimise special effects for progressive video output.
Select whether to display " " (On) or not (Off).
Off
On Select whether to use a screen saver (On) or not (Off).
Off*
On: Press the
pears.
To turn off the screen saver on the screen, press any button on the unit or
remote control.
Off: Cancel the screen saver setting.
Level: Sets a restriction level for DVD viewing.
1 Level 1 - 8: The level 1 is the least strict, and the level 8 is the strictest (restriction differs
depending on the country).
8
No Limit: Parental level control is cancelled.
No Limit*
Code: Set a country code according to a parental control level of discs.
Australia*
---------- Password setting.
---------- This resets all settings to the factory defaults.
---------- DivX Registration Code.
Description
button. After 5 minutes or more of inactivity, a screen saver ap-
Refer-
ence
page
P. 30
P. 56
P. 56
P. 56