Sharp AR-NB2A Setup Manual page 14

INSTALLING THE SOFTWARE
9
For the port to be used, select the
machine set as a shared printer, and
click the "Next" button.
If you are using Windows 98/Me/2000/XP,
you can also click the "Add Network Port"
button and select the printer to be shared
by browsing the network in the window
that appears. (In Windows Vista, the "Add
Network Port" button does not appear.)
If the shared printer does not appear
Note
in the list, check the settings in the
printer server.
10
When the model selection window
appears, select model name of your
machine and click the "Next" button.
11
When the printer driver selection
window appears, select the printer
driver to be installed and click the
"Next" button.
Be sure to select the same printer driver
as the printer driver used in the print
server (the machine).
12
Follow the on-screen instructions.
• If you are using Windows
Note
2000/XP/Server 2003
If a warning message regarding the
Windows logo test or digital
signature appears, be sure to click
the "Continue Anyway" or "Yes"
button.
• If you are using Windows Vista
If a security warning window
appears, be sure to click "Install this
driver software anyway".
13
When the installation completed
screen appears, click the "OK" button.
14
Click the "Close" button in the window
of step 6.
After the installation, a message
Note
prompting you to restart your
computer may appear. If this message
appears, click the "Yes" button to
restart your computer.
This completes the installation of the
software.
• After installation, see
PRINTER DRIVER" (p.18) to check the
printer driver settings.
• To install the Printer Status Monitor, see
"INSTALLING THE PRINTER STATUS
MONITOR" (p.15).
If you installed the PS printer driver,
Note
the PS display font can be installed
from the "PRINTER UTILITIES"
CD-ROM that accompanied the PS3
expansion kit. (p.16)
- 14 -
"CONFIGURING THE