Electronic Zoom Setting [El-Zoom]; Upside-Down Setting [Upside-Down]; Lens Distortion Correction [Ldc] - Panasonic WV-CF344 Operating Instructions Manual

C Electronic zoom setting [EL-ZOOM]
Whether or not to use the electronic zoom is determined.
ON: Uses the electronic zoom.
OFF (default): Does not use the electronic zoom.
When "ON" is selected, the zoom factor and the panning/tilting settings can be configured.
Follow the procedure below.
"SYSTEM SETUP" screen
**SYSTEM SETUP**
SYNC INT
PRIVACY ZONE OFF
STABILIZER OFF
EL-ZOOM ON
UPSIDE-DOWN OFF
I...... 0
LDC
- +
FOCUS MANUAL
RET TOP END
Step 1
Move the cursor to "EL-ZOOM", select "ON" and press the [SET ] button.
→ The "EL-ZOOM" setting screen will be displayed.
Step 2
Move the cursor to "PUSH SET" of "ZOOM" and press the [SET ] button.
→ The zoom setting screen appears.
Step 3
Adjust the angular field of view by changing the electronic zoom factor (up to 2x) using the
[UP]/ [DOWN] button, and press the [SET ] button.
Note:
• When the zoom factor is incremented, resolution will be deteriorated.
Step 4
Move the cursor to "PUSH SET" of "PAN/TILT" and press the [SET ] button.
→ The pan/tilt setting screen appears.
Step 5
Use the [UP], [DOWN], [RIGHT], and [LEFT ] buttons to determine the position of the area to be
set and press the [SET ] button.
The position can be changed in the range of zoom factor set in the "ZOOM" setting screen.
D Upside-down setting [UPSIDE-DOWN]
ON: The video image can be reversed upside down.
OFF (default):
The video image cannot be reversed upside down.
E Lens distortion correction [LDC]
The image may be distorted depending on the lens used and the zoom factor. By adjusting the lens dis-
tortion correction setting, the distorted image can be converted to match the square monitor and achieve
effects desired by the user.
"EL-ZOOM" setting screen
** EL-ZOOM **
ZOOM PUSH SET
PAN/TILT PUSH SET
RET TOP END
"ZOOM" setting screen
** EL-ZOOM **
ZOOM PUSH SET
PAN/TILT PUSH SET
U ZOOM D
RET TOP END
"PAN/TILT" setting screen
** EL-ZOOM **
ZOOM PUSH SET
PAN/TILT PUSH SET
U TILT D / L PAN R
RET TOP END
21