Registering And Deleting Accounts On The Machine - Brother MFC-J825DW Web Connect Manual

Introduction

Registering and Deleting accounts on the machine

Enter the account information and configure the machine so that it can access the service.
Register an account
a
Press Web on your machine's LCD.
b
Important information regarding Brother Web Connect is displayed on the machine's LCD.
Please read the message and press OK twice.
c
You will be asked if you want to display this message again in the future.
Press Yes or No.
d
Choose the desired service.
e
Press Register/Delete Account.
f
Press Register Account.
g
A message is displayed prompting you to enter the temporary ID you received when you applied for
Brother Web Connect access.
Press OK.
h
Enter the temporary ID.
Press OK.
Note
An error message is displayed if the information you entered does not match the temporary ID you
received when you applied for access, or if the temporary ID has expired. Either enter the temporary ID
correctly, or apply for access again and receive a new temporary ID. (Applying for Brother Web Connect
Access uu page 6)
i
A message is displayed prompting you to enter a name for the account as you want it to be displayed on
the LCD.
Press OK.
j
Enter the name by using the buttons on the LCD.
Press OK.
k
Do one of the following:
If you want to set a PIN code for the account, press Yes. Then enter a four-digit number and press

OK. (The PIN code prevents unauthorized access to the account.)
 If you do not want to set a PIN code, press No.
l
You will be asked if you want to register the account information you entered.
 Press Yes to register.
 Press No to enter the information again. Go back to step h.
1
1
1
8