Table of Contents
Advertisement
PLAYING A DISC
Repeat
• REPEAT are available only during playback.
To activate the repeat function, press REPEAT during playback.
• The repeat mode changes as described below every time
you press the button.
CHAPTER
(current chapter repeat)
(current title repeat)
CHAPTER
(current chapter repeat) (current title repeat)
NOTES:
• Repeat Title/Chapter is not available with some scenes.
• The REPEAT setting will be cleared when moving to
other title or chapter.
To activate the repeat function, press REPEAT during playback.
• The repeat mode changes as described below every time
you press the button.
TRACK
(current track repeat)
(entire disc repeat)
NOTES:
• The REPEAT setting will be cleared when moving to
other track.
• Repeat playback does not function during A-B REPEAT
playback.
TRACK
GROUP
(current track repeat) (current group repeat)
A-B REPEAT
DVD
1
Press A-B REPEAT at your chosen starting point.
•
A- appears briefly on the TV screen.
2
Press A-B REPEAT again at your chosen end point.
•
A-B appears briefly on the TV screen, and the repeat
sequence begins.
3
To exit the sequence, press A-B REPEAT.
NOTES:
• The A-B REPEAT section can only be set within the cur-
rent title (for DVDs), or current track (for audio CDs).
• A-B REPEAT is not available with some scenes in DVD.
• To cancel the A point which was set, press CLEAR.
• A-B REPEAT playback does not function during title,
chapter, track or all repeat playback.
TITLE
(repeat off)
DVD-RW
VR mode
TITLE
ALL
(entire disc repeat)
CD
without PBC function
ALL
(repeat off)
MP3
ALL
(entire disc repeat)
CD
DVD-RW
VR mode
Programme (CD)
You may determine the order in which tracks will play.
DVD
1
Press MODE (playback
must first be stopped).
• The PROGRAM screen
will appear.
OFF
Press ▲ or ▼ to select a
2
track, then press ENTER.
• Press CLEAR to erase
the most recently entered
programme.
3
Press PLAY to play the programmed tracks.
NOTES:
OFF
• While the programme is being played back, the STOP
(repeat off)
works as follows.
• Press STOP once and then PLAY again, playback will
restart from the point where STOP was pressed.
(Programme continued)
• Press STOP twice and then PLAY. Playback starts
from the track in the original order. However, the pro-
gramme can be called back when you follow the above
VCD
steps. Your programmes will be stored unless either the
disc tray is opened or power is turned off.
• Up to 99 programmes can be entered.
• To erase all programmes at once, select ALL CLEAR at
the bottom of the list at Step 2.
• To repeat the current track in the programme, press
REPEAT repeatedly until
OFF
playback. If you like to repeat the entire programme
press REPEAT repeatedly until
playback.
• Refer to page 17 for programme playback of MP3 and
JPEG.
Random Playback (CD)
JPEG
This shuffles the playing order
of tracks instead of playback in
OFF
the sequence.
(repeat off)
1
In stop mode, press MODE
repeatedly until the RAN-
DOM screen appears.
2
Press PLAY to start random
VCD
playback.
NOTES:
• To repeat the current track in the random selection,
press REPEAT repeatedly until
during playback. To repeat the entire random selection
press REPEAT repeatedly until
playback.
• Refer to page 17 for programme playback of MP3 and
JPEG.
– 15 –
CD
0:03:30
TRACK appears during
ALL appears during
CD
TRACK appears
ALL appears during
EN
Advertisement
Table of Contents
