DVD OPERATION
Basic Playback
Getting started
•
Turn on the power of the TV, amplifier and any other com-
ponents which are connected to the DVD.
•
Make sure the TV and audio receiver are set to the cor-
rect channel.
•
When you play NTSC discs, the NTSC signal will convert
to a modified PAL signal (PAL 60 Hz).
1
Press OPERATE.
• "P-ON" will appear briefly on the display panel.
2
Press OPEN/CLOSE to open disc loading tray.
3
Place the chosen disc in the tray, with the label
facing up.
4
Press PLAY.
• Playback starts automatically.
5
Press STOP to stop playback.
NOTE:
• DVDs may have a region code. Your DVD player will not
play discs with a region code different from 2
(Europe/Japan).
DVDs may contain menus to navigate the disc and access
DVD
CD
special features. Press the appropriate numerical key or use
Arrow ( L / K / B / s ) to highlight your selection in the DVD
menu and press ENTER to confirm.
NOTE:
1
2
3
4
1
2
3
1
2
– 12 –
General Features
• Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.
Disc menus
Press MENU.
• The DVD's main menu will appear.
If a title menu is no available,
appear on the TV screen.
If disc menu is available on the disc, audio lan-
guage, subtitle options, chapters for the title and
other options will appear for selection.
Press Arrow ( L / K / B / s ) to select an item, and
ENTER to confirm selection.
Title Menu
Press TITLE.
• The title menu will appear.
If a title menu is no available,
appear on the TV screen.
Press Arrow ( L / K / B / s ) to select an item, and
ENTER to confirm selection.
• Playback will begin at the selected Title.
Pause
During playback, press PAUSE.
• Playback will pause and sound will be muted.
To continue playback, press PLAY.
DVD
symbol may
DVD
symbol may
DVD
CD
EN