Plasmacluster Operation; 10°C Operation - IVT AY-XP12FR Operation Manual

PLASMACLUSTER OPERATION

The Plasmacluster Ion generator inside the air conditioner will release positive and
negative plasmacluster ions into the room.
Approximately the same numbers of positive and negative ions released into the air will
reduce some airborne mold.
DISPLAY
NOTES:
• Use of the PLASMACLUSTER operation will be memorized, and it will be activated the next
time you turn on the air conditioner.
• To turn off the PLASMACLUSTER lamp, press the DISPLAY button.
• When the PLASMACLUSTER button is pressed while the unit is not operating, the
PLASMACLUSTER operation will be performed without accompanying air conditioning mode
(eg, HEATING or COOLING).
The mode symbol of the remote control will go off and the fan speed can not be set AUTO.
10°C OPERATION
Heating operation with 10°C set temperature will be performed.
AM
DISPLAY
MODE 1h
CLEAN
FAN
SWING
1
During operation, press the PLASMACLUSTER
button.
• The remote control will display "
• The blue PLASMACLUSTER lamp on the unit will
light up.
TO CANCEL
1 Press the PLASMACLUSTER button again.
• The PLASMACLUSTER lamp on the unit will turn
off.
1
Press the MODE button and select HEAT
mode.
2
Press the ON/OFF button to start HEAT
operation.
3
Press the 10°C button.
• The remote control will display 10°C .
2
TO CANCEL
Press the 10°C button again.
• 10°C operation will also be cancelled when
1
the operation mode is changed, or when the
unit is turned off.
3
NOTE:
10°C operation will not be available with heating
•
operation automatically selected by AUTO mode.
12
"