Advertisement
Quick Links
Download this manual
See also:
User Manual
PowerLite
Quick Setup
Before using the projector, read these instructions and the safety instructions in the
User's Guide on your projector CD-ROM.
1
Unpack the projector
You should have the following items:
Interface label stickers
(Included for Canada only)
Canada only: For French speakers, remove sticker(s) from the interface
label backing sheet and place over corresponding text on the control
panel.
2
Choose a location
The easiest way to set up your projector is to place it on a table in front of
your screen or wall, or on a high shelf behind you. See the User's Guide for
other ways of setting up the projector.
Table
The distance between the projector and the screen generally determines the
size of the image, but the size can also vary depending on the aspect ratio
(image shape), how you zoom into the image, and whether you've adjusted
other image settings. Depending on the image settings you've chosen, you
can place the projector anywhere from 33 to 407 inches (84 to 1035 cm)
from the screen.
Use the tables in the User's Guide, or the Image Size or Projection Distance
calculator on the Multimedia Projectors page on Epson's website to help
you determine the proper projection distance.
*411537000*
*411537000*
Home Cinema 700
®
Projector
User's Guide
CD-ROM
Power cord
Projector
remote control
Shelf
Component-to-VGA
adapter
Batteries
Advertisement
Related Manuals for Epson PowerLite 700
Summary of Contents for Epson PowerLite 700
-
Page 1: Quick Setup
PowerLite Quick Setup Before using the projector, read these instructions and the safety instructions in the User’s Guide on your projector CD-ROM. Unpack the projector You should have the following items: Projector User’s Guide CD-ROM Interface label stickers (Included for Canada only) Canada only: For French speakers, remove sticker(s) from the interface label backing sheet and place over corresponding text on the control panel. -
Page 2: Set Up The Remote Control
Set up the remote control Remove the battery cover. I nsert the batteries. Replace the battery cover. Plug in and turn on Open the A/V Mute slide (lens cover). C onnect the power cord to the projector and plug the other end into an electrical outlet. The power light on the projector turns orange. Connect your video source, as described to the right. Turn on your computer or video source. P ress the power button on the projector or remote control. The projector beeps, the warms up. When the ready for use. Power button Power light power light flashes green, and the projector power light stays green, the projector is Power button... - Page 3 T urning off the projector If you’re using a computer, shut it down first, while you can still see the display. Press the W hen you see the confirmation message, press the button again. The projector beeps twice and the turns orange. W ith Epson’s Instant Off you’re done, just unplug the projector and it’s ready to travel. Connect your video source Follow these instructions to connect the projector to your video equipment using an HDMI cable or component video cable and adapter. For instructions on using other connection options, or connecting to a computer, see the User’s Guide on your CD-ROM. Connecting with an HDMI cable For the best image and sound quality, connect your video equipment to the HDMI port, if possible. Connect an HDMI cable (not included) to the HDMI port on your video player and the HDMI port on the projector. Start your video or presentation. Use the Source Search button on the projector or the Search button on the remote control to select the HDMI source, if necessary. Connecting with a component video cable If your video equipment has component video connectors (three connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can use a component video cable (not included) along with the included component-to-VGA adapter. Connect your component video cable to your video device. Connect the component-to-VGA adapter that came with your projector to the component video cable.
-
Page 4: Adjust The Image
S ee your User’s Guide on the CD-ROM for more information about image adjustments. Install User’s Guide and register your projector I nsert the projector CD-ROM in your drive. If the installer doesn’t open automatically, double-click the Epson CD-ROM icon, then double-click the Epson installer icon. Select English. Follow the instructions on the screen to register. You can also register at www.epson.com/webreg. NOTE A fter you register the projector, click User’s Guide to install it. (If you are using Windows and don’t already have Adobe Reader , click Adobe Reader and follow the on-screen ® instructions to install it.) W hen you’re done, click Exit. To open your User’s Guide, double-click the PL HC700 User’s Guide icon on your desktop. -
Page 5: Remote Control Map
Turns off image Auto button Resets tracking, sync, and position Aspect button Changes screen size Page Up/Down buttons Control PowerPoint slides ® (USB cable required) E-Zoom +/– buttons Zoom into image details Menu button Accesses menus Where to get help Internet support V isit Epson’s support website at epson.com/support and select your product for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions. Speak to a support representative T o use the Epson PrivateLine the PIN on the Epson PrivateLine Support card that came with your projector. This service is available 6 for the duration of your warranty period. You may also speak with a projector support specialist by dialing one of the following numbers. (Toll or long distance charges may apply.) U.S.: (562) 276-4394, 6 Canada: (905) 709-3839, 6 Days and hours of support are subject to change without notice. Purchase supplies and accessories Y ou can purchase screens and other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). -
Page 6: Troubleshooting
Troubleshooting If you see a blank screen If you see a blank screen or the No signal message after turning on your computer or video source, check the following: M ake sure the flashing and the A/V Mute slide (lens cover) is open. M ake sure the cables are connected correctly. (See the User’s Guide for more information.) I f you’ve connected more than one video source, you may need to press the Source Search button on the projector or the Search button on the remote control to select the one you want to watch. (Allow a few seconds for the projector to sync up after pressing it.) If the picture is taller on one side T he projector is set at an angle to the screen. Face it squarely toward the screen. Epson and Instant Off are registered trademarks and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PowerLite and PrivateLine are registered trademarks of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice. © 2008 Epson America, Inc. 7/08 Printed in XXXXXX power light on the projector is green and not CPD-26345...