Adjusting The Image Shape - Epson EMP-821 User Manual

Pointer button
Enter button Menu buttton
note
You can also use the buttons
on the projector to access the
menu system:
Menu button ESC button
Enter button Arrow buttons
Projecting
38

Adjusting the Image Shape

The projector automatically corrects images that are distorted when
the projector is tilted up or down (up to a 15° tilt). The Keystone
window appears on the screen while the projector makes the
correction. If the projected image still isn't rectangular or has a
"keystone" shape, do one or more of the following:
If your image looks like
projector off to one side of the screen, at an angle. Move it directly
in front of the center of the screen, facing the screen squarely.
If your image looks like
may have been disabled or you may need to manually adjust the
keystone correction value. (Auto Keystone is not available when
you're using ceiling or rear projection.) Follow the directions
below:
To turn on Auto Keystone, press the
remote control. Use the
control (or the arrow buttons on the projector) to select the
menu, then press
Setting
use the pointer button to highlight this option and press
. Select
Enter ON
and press
Enter
pressing the
Menu
To manually adjust the keystone correction value, press the
or buttons on the projector to correct the shape of
the image. After correction, your image will be slightly
smaller.
or , you've placed the
or , the Auto Keystone feature
Menu
pointer button on the remote
. If
Enter Auto Keystone
in the Auto Keystone window that appears
to save your changes. Exit the menu by
button.
button on the
is ,
OFF