Epson EASYMP EMP-1705 Operation Manual page 8

Using the main screen of EMP NS Connection
projector or a profile-based search.
is displayed when a projector cannot be found as
a result of a search for an IP address.
Projector name The projector's name is displayed.
IP address The projector's IP address is displayed.
(only for "Advanced
Connection Mode")
SSID The projector's SSID is displayed.
(only for "Quick
Connection Mode")
Display When "Use multi-display" is checked, select the
(When "Use multi- number of the display to use.s
display" is checked)
Update information Updates the status of those projectors displayed in the
(only for "Quick
list.
Connection Mode")
Save profile Saves the results of a search for projectors on the
network as a profile. s
Clear list
Deletes the currently displayed list of projectors.
Disable interrupt Select this to prevent an interrupt connection by other
connection
computers while a connection is established.
Use multi-display
Select this when using the Multi-screen display
function. When this is selected, "Display layout" and
"Display properties" are displayed at the bottom of the
screen. Multi-screen display s
Set options You can set the environment, such as the processing
method, when EMP NS Connection is started. For
option settings, see s
Connect A projector can be clicked once you place a check
mark against it. Whenever connection with a projector
is possible, a toolbar is displayed.
is displayed to indicate a search for a specified
p.23
p.28
p.16
p.34
8