Advertisement
KNOW
YOUR
LASER
TRIM SAW
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
EDGE GUIDE
Edge guide is used when making long or wide rip cuts
with the saw.
SWITCH TRIGGER
The trim saw is equipped with a pre-travel safety switch
which reduces the possibility of accidental starting. When
you depress the switch, the saw will not start until you
reach the pre-travel position. You must depress the switch
fully to activate the saw.
BLADE WRENCH STORAGE
Convenient wrench storage for quick blade changes.
DEPTH CUT
Adjusts the depth of cut from 0 in. to 1-9/16 in.
SPINDLE LOCK
The spindle lock allows you to secure the blade when
turning the blade screw.
NOTE: Do not run trim saw with spindle lock engaged.
DUST CHUTE
To direct saw dust and chips away from the operator,
a dust chute is located on the side of the upper blade
guard.
ERGONOMIC DESIGN
The design of the trim saw provides for maintaining proper
two hand control when cutting. It has been designed to be
comfortable and easy to grasp.
LASER GUIDE
The laser guide will generate a red colored line on the
work surface when turned on to aid in alignment.
UNPACKING
This product requires assembly.
• Carefully remove the tool and accessories from the
box. Make sure that all items listed in the packing list
are included.
,_
•
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
• Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
• If any parts are damaged or missing, please call
1-800-932-3188 for assistance,
PACKING LIST
Cordless Trim Saw with Laser(Item No. 11575)
5-1/2 in. Blade
Battery Pack
Laser Guide Batteries (2)
Charger
Edge Guide
Blade Wrench
Carrying Case
Operator's Manual
WARNING: If any parts are missing do not operate
the tool until the missing parts are replaced. Failure
to do so could result in possible serious personal
injury.
WARNING: Do not attempt to modify this tool
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING: To prevent accidental starting that
could cause serious personal injury, always remove
the battery pack from the tool when assembling
parts.
11
Advertisement
