Using Channel Zapping; Turning Off The Ant 2 Port - Epson Livingstation LS47P1 User Manual

Note
If you're viewing the Photo
viewer in the right POP
window, press Swap to
select the other source
before resizing the window.
You can't resize the Photo
viewer window directly in
POP mode.
Note
You also need to turn off
the V-Chip feature to use
channel zapping. See
page 45 for instructions.
68
Using the TV Features
To resize the POP windows, press Swap to select the source, then press Next > to
•
enlarge its window or Prev. < to reduce it. The size of the other window is also adjusted
to fit the screen, as shown below.
]

Using Channel Zapping

Channel zapping lets you get a quick look at programs broadcast on up to seven additional
channels while you're watching a TV program on an eighth channel. If you see a different
channel that you want to watch, you can make it your main program.
To use channel zapping, you must be using the jumper cable that connects the ANT 2 and
RF Output ports. This cable was installed on your TV at the factory. You must also turn off
the ANT 2 port using the menus, as described below. This frees the necessary tuner.

Turning Off the ANT 2 Port

1 Make sure the jumper cable connecting the ANT 2 and RF Output ports is still installed
on the back of your TV.
2 Press the Menu button on the TV panel or remote control. You see the Video menu.