WARNING:
Make certain that unit is disconnected
from power source before attempting to service or
remove any component.
CLEANING
• Keep machineand workshopclean. Do not allow
sawdustto accumulateon bandsaw.
•
Keep wheels clean. Debris on wheels will cause
poor tracking and blade slippage.
•
Keep mechanisms and threaded or sliding surfaces
clean and free of foreign particles.
•
Operate band saw with a dust collector to minimize
clean up.
LUBRICATION
• The shielded bali bearings are permanentJy lubricat-
ed and require no further lubrication.
• Small amounts of machine oil can be applied to belt
tension mechanisms
and threaded or sliding sur-
faces.
• Occasionally applya coat of automobiletype wax to
table top to keep itslick and corrosion free.
KEEP BAND SAW IN REPAIR
•
If power cord is worn or cut in any way, have It
replaced.
• Replace any damaged or missing part.
• Use parts list to order parts.