Getting To Know Your Belt And Disc Sander - Craftsman 113.225941 Owner's Manual

_Getting to Know Your Belt and Disc Sander
WARNING:: To avoid Injury from accidentalJi
start, turn switch "OFF" and remove plug from
power source outlet before making any adjust-
ments-
ABRASIVE DISC 4 BACKSTOP BACKSTOP 1
BELT ADJUSTMENT
LOCK SCREW KNOB
\
WORK
TAB LE
WORK TABLE BELTTABLE
6
TILT LOCK SCREW STOP
[ i ii ii i , •
1. Abrasive Belt Adjustment Knob, Causes the idler
pulley to move in or o ut for tracking adjustment.
2. Abrasive Belt Tension Lever. Causes the idler pulley
to move backward and fox,yard for adjustm ent of the
belt tension.
See"Assembly"section- "Installing Abrasive Belt"
BELT TENSION
LEVER
\
IDLER
PULLEY
BELT ADJUSTMENT KNOB
16