Zenith SRV1341 Operating Manual & Warranty page 14

When first using the fV/VCR, you may want to select
language (English or Espafiol=Spanish) and preset the
tuner to show only the channels you receive in your area.
You must use the remote control for the following
steps.
NOTE: Channel memory programming is not needed
when using a converter/de-scrambler box.
Channcls that you no longer receive or seldom watch
can be deleted from the memory. (Of course, you can
add the deleted channels to the memory again.)
1 Select "CHANNEL SET UP"
Ill_ -MENU-
'riMER PROGRAMMING
P_CTURE CONTROL
SETTING CLOGK
CHANNEL SET UP
USER'S SET UP
LANGUAGE ENGLISH]
CAPTION [OFF]
"rIME SEARCH
INDEX SEARCH
Press MENU button to move to
.................................................................... CHANNEL SET UP" and press
1 Plug the TV/VCR power cord
into a standard AC outlet.
SELECT button.
2
Turn on the TV/VCR
3
Select "ENGLISH" or "ESPAI_IOL"
,S&
Select by using the CH • or!'
button. "[ ]" indicate the selected
language.
I_ -SETUP -
LANQUAGE
IENGLISH I ESPAROL
AUTO PRESET
4 Begin auto preset - =TOP-
LANGUAGE
Press MENU button to move to
,EN_,_.] ESPA_
"AUTO PRESET" and press ..........
SELECT button.
The tuner scans and memorizes
all the active channels in your area.
NOTES: ' '
• The TV/VCR distinguishes between standard TV
channels and CATV automatically.
• If you want to play or record a video tape BEFORE
presetting the tuner, you must press MENU button.
To preset the tuner again, see "AUTO PRESET
AGAIN".
5 After scanning
The tunerstops at the lowestmemorizedchannel.
(TV mode: from CH 02/CATV mode: from CH 01)
Should you want to recall the selected channels, you can
select the desired channel by using the remote control
number buttons or CH • or V.
TO RETURN TO TV MODE WHEN
SCANNING
Press MENU button in scanning mode.
2
Select "ADD/DELETE CH"
II_ - CHANNEL SET UP -
Press MENU button to move to _v,cA_ [_ ]
"ADD/DELETE CH" and press
AU,OPRESE_
S ELECT button. AD_, OELE_ _N
3
Enter the desired channel number
Press CH • or • button until the
ADS_ELE_EON
desired channel number appears. D, __, }
You can also use the number but-
tons to enter it.
4
Delete (or add) it from (into) memory
Press ADD/DELETE button. The channel number
changes to light red. The channel is deleted from
memory.
• To delete another channel, repeat steps [3] and [4].
• If you press the ADD/DELETE button again, the
channel is added to memory again.
Added channel : Light blue.
Deleted channel : Light red,
5 Exit the channel setup mode
Press MENU button to return to TV mode.
NOTE: If you wish to confirm that channel(s) has been
deleted or added, press CH • or • button.
-14- EN
6F06