Recording
Record One Program While
Watching
Another
ENGAGE TV MODE
During recording...
• Press1-V/VIDEO. The VCR's VIDEO indicator goes
out. (If you are using the RF connection (_c_" p g. 6). to
view the output from your VCR, the TV broadcast
being recorded disappears.)
• If you are using the AV connection (_" pg. 6), to view
the output from your VCR, change the TV's input
mode from AV to TV.
SELECT CHANNEL FOR
VIEWING
Use the TV's channel selector to set the channel you
want to watch.
Display Elapsed Recording
Time
RESET COUNTERTO ZERO
Before recording starts, press C.RESET. The counter
resetsto zero and displays the exact elapsed time as the
tape runs.
DISPLAY ELAPSED TIMEON
SCREEN
During recording, press OSD at any time to see the
elapsed time. All indications corresponding to the
current status of the VCR are displayed for 5 seconds.
The counter display remains on the screen indicating the
elapsed time. Press OSD again to remove the display.
• Make sure "SUPERIMPOSE" is set to "ON" (Q_7' pg. 28).