Table of Contents
Advertisement
GETTING
STARTED
Step 8. Programming Available Channels
YOU
MUST
PERFORM
THE
AUTOMATIC
CHANNEL
PROGRAMMING
BEFORE
MANUALLY
ADDING
AND
DELETING
CHANNELS
BECAUSE
OF THE
DIGITAL
TUNING
SYSTEM
USED
BY THE
STB.
THIS
METHOD
WILL
ENSURE
THAT
EVERY
AVAILABLE
CHANNEL
IS CAPTURED
AND STORED
INTO MEMORY.
Automatic
Channel
Programming
The STB will scan for all available channels and store them in memory.
The scan will
normally take several minutes to complete.
Procedure
o
In SET UP Menu, select PROGRAM to choose AUTO to automatically scan and store all
channels with a signal.
•
Press the ACTION button to cancel or exit back to SET UP Menu.
Note:
As more
digital
channels
become
available
in your
area,
the AUTO
feature
must be selected
to store the new digital channels
into memory.
Manual Channel
Programming
After programming
all available
channels,
you can use the MANUAL
feature
to
selectively add or delete channels.
Procedure
[3
In SET UP Menu, select PROGRAM to chOose MANUAL to manually add or delete
channels.
Use the A, • arrow buttons and numeric keypad to select a channel.
•
Use the 4
and I_ arrow buttons to add and delete channels.
Press the ACTION button to exit back to SET UP Menu.
SET UP
AUTO
MANUAL
The AUTO feature must be selected first to ensure that all
available channels are captured and stored into memory.
[]
Advertisement
Table of Contents
