Sony Grand Wega KF-60DX100 Operating Instructions Manual page 24

Installing and Connecting the LCD Projection TV
Connection Description
1_ AUX Allows you to view local and cable channels if your cable
provider does not feature local charmels= You can switch
between local and cable channels easily by pressing ANT
on the remote control. Devices connected to the AUX
input cannot be viewed in Twin View.
TO CONVERTER This is a VHF/UHF OUT jack that lets you set up your
LCD projection TV to switch between scrambled channels
through a cable boxJ and normal cable channels t CATV1.
Use this =ack instead of a splitter to get better plcture
qualit) when switching between scrambled and
unscrambled cable channels.
VHF/UHF Connects to your VHF/UHF antenna or cable.
S VIDEO Connects to the S VIDEO OUT jack of your VCR or other
(Rear and sideJ S ViDEO-eqmpped video component, ProvMes better
picture quality than the VHF/UHF jacks or the Video IN
jack.
VIDEO Connects to the audio and video OUT jacks on your VCR
(L/R)/AUDIO or other video component. A fourth video input i VIDEO
€Rear and sideJ 2 ) is located on the side panel of the LCD projectmn TV.
HD/DVD IN [1080L Connects to your DVD player's or Digital Set-top box's
720p, 480p, 480il component video (Y. PB. PR) and audio L/R/jacks.
[] TV OUT Connects to an AV receiver for greater control of all audio
and video eqmpmem/see page 40/. For detailed
reformation about connection, refer to the operaung
manual supplied with the AV receive_
Connects to the left and right audio inputs of your audio or
video component.
AUDIO OUT
fVAR/FIX_
L (MONO) R
CONTROL S
N/OUT
To control other Sony eqmpment with the LCD projection
TV's remote control, connect the CONTROL S IN jack of
the eqmpment to the CONTROL S OU3 jack on the LCD
projection TV with the CONTROL S cable
To control the LCD projection TV with a remote control
for another Sony product, connect the CONTROL S OUT
jack of the eqmpmem to the CONTROL S IN jack on the
LCD projection TV with the CONTROL S cable
24