Table of Contents
Advertisement
VlZIO VP422HDTV10A UserManual
2oq SettinQ
Up
to
Watch
Television
For 'Preparing Your LCD HDTV for Wall Mounting', see page 6.
2omo
Basic
LOB
HDTU
Start
Up
1.
Connecting
the Power Cable
Connect the power cord to the power cord connector on the back of the High Definition TV, and
then plug the power cord into an AC wall socket.
2.
Connect
Audio and Video Cables to the HDTV
(see pages 13 ~ 25 for detailed steps)
3.
Turning
Power On
Once all the components are connected, press the Power ON button on the side of the High
Definition TV, or press the Power ON (Red) button on the remote control.
4.
Initial Setup
After powering on the TV set, the Initial
Setup screen will come up; please press
the _ button on the remote control.
a.
The Language choice screen will
be displayed; the default English
option is highlighted.
If you wish
to change the OSD language to
Espa6ol or Frangais, press the
button on the remote control to
select the language you want.
Press the _
button on the
remote to go to the next screen.
Note:
At this point, if a Set-Top Box from your Local Cable or Satellite Service Company or other
equipment is being used; please press the LAST key on the remote control and go to Step 5. If this is not
your case, please continue at Step b.
Version 3/7/2008
27
www.VlZlO.com
Advertisement
Table of Contents
