Advertisement
4.
Now you can display images and play back movies as you normally do.
• Output to a TV is not supported while the camera is in the REC mode.
• When the camera is connected to a TV for movie playback, only movie images are
displayed on the TV screen. The camera's monitor screen will show on-screen
information only (without any movie image).
• Before connecting to a TV to display images, be sure to configure the camera's
[It's] (REC) and [I-_--I](PLAY) buttons for "Power On" or "Power On/Off" (page 158).
• Audio is initially output by the camera at maximum volume. When you first start
displaying images, set the TV volume control at a relatively low level and then
adjust it as required.
_NOTE
• Audio is monaural.
• Some TVs may not be able to output images and/or audio correctly.
• All icons and indicators that appear on the monitor screen also appear on the TV
screen. You can use [A] (DISP) to change the display contents.
Recording
Camera
Images to a DVD Recorder
or Video
Deck
Use the following method to connect the camera to the recording device using the
camera's bundled AV cable.
- DVD recorder or video deck: Connect the AV cable to the VIDEO IN and AUDIO IN
terminals.
- Camera: Connect the AV cable to the USB/AV port.
You can play a slideshow of snapshots and movies on the camera and record it on a
DVD or video tape. You can record movies by selecting "_6'] Only" for the slideshow
"Images" setting (page 111 ).
For information
about connecting a monitor to the recording device and about how to
record, see the user documentation
that comes with the recording device you are
using.
110
Viewing Snapshots and Movies
Advertisement
