Press The 4; Or Turn The - Canon POWERSHOT G12 User Manual

You c an cut o ut aportion ofarecorded image and s ave itas anew image file.
Trimming Area
Trimming Area Display
Recorded pixels
after trimming
Choose [Trimming].
Press the MENU button to choose
[Trimming] in the F¢] tab, then press the @
button.
Choose a. image.
Press the 4 _ buttons or turn the _ dial to
choose an image, then press the @
button.
,_ Adjust the trimming area.
A frame will appear around the portion of
the image to be trimmed.
The original image will display in the upper
left and the trimmed image will display in
the lower right.
If you move the zoom lever to the left or
right, you can change the frame size.
If you press the _'v-4_ buttons, you can
move the frame.
If you press the
DISR
button, you can
change the frame orientation.
Bn an image with detected faces, gray
frames appear around the faces located in
the upper left image. The frames can be
used for trimming. You can switch between
frames by turning the _ dial.
Press the @ button.
Save as a new imageand display.
Follow Steps 4 and 5 on p. 146.
147