Canon POWERSHOT A550 User Manual page 82

The camera moves when OConfirm the procedures in
the shutter button is "_ appears" (p. 78).
pressed.
AF-assist Beam is set to • In dark places where it is difficult
[Off]. for the camera to focus, the AF-
assist Beam will emit to assist
focusing. As the AF-assist Beam
will not function when turned off,
set it [On] to activate it (p. 21 ).
Take care not to obstruct the AF-
assist Beam with your hand when
used.
Subject is out of focal • Shoot with the subject at the
range, correct focusing distance (p. 104).
The subject is hard to • Use the focus lock or AF lock to
focus on. shoot (p. 40).
Insufficient light for OSet the flash to _J (Flash on)
shooting. (Basic Guide p. 14).
The subject is • Set the exposure compensation to
underexposed because a positive (+) setting (p. 44).
the surroundings are too • Use the AE lock or spot metering
bright, function (pp. 42, 44).
Subject is too far away for • Shoot within correct flash range of
flash to reach, the subject when using the built-in
flash (p. 105).
• Raise the ISO speed and then
shoot (p. 52).
Subject is too close, • Shoot within correct flash range of
making the flash too the subject when using the built-in
strong, flash (p. 105).
80