Epson PowerLite 1705c User Manual page 58

note
For specific details about
your network, please consult
your network administrator.
If you don't know your
gateway or access point
address, see page 64. If
you're using AirPort, start
the AirPort Admin utility,
select your base station and
click . Then click
Configure
the tab to see your
Network
base station's IP address.
Presenting Through a Wireless Network
58
your AirPort network may be different from that of your AirPort
base station; select your base station in the AirPort Admin utility
and click
Configure
Highlight the
ESSID
Press the pointer button to select individual letters; then press
to input a character. To add a blank space or to navigate
Enter
backward and forward through the input text, highlight the
arrows and press
Enter
letters, highlight the option and press
highlight and press
Finish
Note that the ESSID is case-sensitive (if you enter the name in
uppercase on the projector, you must type it the same way on the
computer connecting to the projector).
6. If your access point assigns IP addresses automatically, turn on
. Otherwise, turn off DHCP and enter the following
DHCP
information:
: Enter the IP address you want to assign to the
■
IP address
projector. It must be formatted like other addresses on the
network. The last section should be unique.
■
Subnet mask
depends on how your network is set up.
■ Gateway address
the access point or AirPort base station when it was set up.
■ DNS server (primary)/DNS server (secondary)
IP address that was assigned to the DNS server(s) for your
network.
to check the name of your network.)
text box, press
Enter
. To toggle symbol settings or capital
Enter
.
Enter
: For example: 255.255.255.000, but this
: Enter the IP address that was assigned to
, and enter a name:
. When you're done,
: Enter the