Epson C82362 Administrator's Manual page 267

NetWare print servers cannot be monitored beyond routers.
Cause
The number of hops is set to
0.
NDS printers cannot be monitored.
Cause
You are not using a Novell
Client.
An existing printer cannot be found in Windows NT 3.51.
Cause
You may have logged on to
the network before network
modules were completely
loaded.
What to do
Change the number of hops according
to "Making Status Monitor Settings"
on page 11-11. See also "Tips for Using
EPSON Status Monitor 2" on page
11-32.
What to do
If you are using Windows NT, use
Novell IntranetWare Client. If you are
using Windows 95, use Novell
IntranetWare Client 32 Ver1.12 or later.
If you are using Windows 98, use the
latest Novell Client.
What to do
Log on again. To clear this problem
immediately after the operating system
starts, log on after access to the hard
disk drive is completed.
Troubleshooting
14
14-13