Ejecting A Caddy - Sony CDU948S User Manual

Ejecting a Caddy

In such a case, eject the caddy and re-insert it properly. If the busy
indicator remains lit amber, consult your dealer or qualified service
personnel. The busy indicator also lights amber during audio play.
However, this is not a malfunction.
1
Turn on the power supply.
2
Press the eject button on the drive unit.
Notes:
• The eject button does not work if it is disabled by the software.
• To eject a caddy when the eject button is disabled by the software:
–Make sure that the jumper block's PREVENT/ALLOW is set to
ON.
–Turn the power of your computer off, and turn it on again. (Or
reset the SCSI bus using a software command.)
CD Ca dd y
Operating the Drive
23