Downloading Images (Imagebrowser); Camerawindow Automatic Launch Setting; Mac Os 10.2 - 10.3 - Canon ZR200 Software Instruction Manual

Downloading Images (ImageBrowser)

Below explains the procedure for connecting a camcorder to a computer using
the USB cable.
For connecting a PC card reader/writer, see Using a PC Card Reader/Writer
( 23).
If a memory card contains an enormous volume of images (approx.
1000 or more), you may not be able to download images with
ImageBrowser or an OS standard software depending on the computer
you are using or the installed OS. In this case, use a PC card reader to
download images.
Observe following precautions when the camcorder's card access indicator
is flashing (the camcorder is reading or writing from or to the memory card).
Failure to do so may cause memory card data to become corrupted.
- Do not open the memory card cover, remove the memory card or detach
the USB cable.
- Do not turn off the camcorder or the computer.
- Do not change the position of the POWER switch or the TAPE/CARD
switch.
Images recorded onto the memory card or downloaded to the hard disk are
important original data files. Create a copy of the file first before working on it
on your computer.

CameraWindow Automatic Launch Setting

• When the first time connecting the camcorder to the computer, perform the
steps below.
• To apply automatic launch settings in Mac OS 10.1.5, see Mac OS 10.1.5
( 17).

Mac OS 10.2 - 10.3

1
Connect the camcorder to the computer (
2
Start Image Capture application and select [Preferences]
from the [Image Capture] menu.
Downloading Images (ImageBrowser)
14).
E
15